Hook Up Kit; About This Kit; Kit Contents - HP MCS 5042 Installation Manual

Hook Up Kit

About this kit

Before the delivery of your HP mc-Series 5042 Rack, you must install this kit to your facility water line at the
location of your MCS 5042 unit installation.
For location recommendations, see the HP mc-Series 5042 Rack Site Preparation Guide on the HP website
(http://www.hp.com/go/rackandpower).

Kit contents

Item Description (Quantity)
Main hose assembly* (2)
1
90° elbow assembly (2)
2
Viton gasket (2)
3
M6 screw (4)
4
5-mm Hex L-key (1)
5
Warning label (2)
6
M5.5 x 10 self-tapping screw (8)
7
Hose mounting brackets with hose clamp (2)
8
Top cover plate (1)
9
Rear cover plate (1)
10
*Not drawn to scale. The actual length of the main hose is approximately 3.5 m (11.5 ft).
Hook Up Kit 26