Tools Needed For Assembly; Unpacking Instructions - Emerson LOFT CF765WW00 Owner's Manual

This Manual Is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver
One stepladder
One wire stripper
MATERIALS
Wiring, outlet box and box connectors must be of type
required by the local code. The minimum wire would
be a 3-conductor (2-wire with ground) of the following
sizes:
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a
check mark in the box. This will insure that all steps have been completed and will be helpful in finding
your place should you be interrupted.
WARNING
!
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
WARNING
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
1. Unpack the items carefully to avoid damage to any
of the components.
Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to the exploded view illustration.
a. Fan motor assembly
b. One ceiling cover
c. One coupling cover
d. One motor cover
e. Three fan blade assemblies
f. One hanger bracket
g. One hanger ball/downrod assembly
h. One SW46 wall control
i. One loose parts bag, containing:
1. One clevis pin
2. One hairpin clip
3. Three wire connectors
4. Seven M6 x 12mm pan head
blade screws
5. Seven blade M6 lockwashers
6. Four M5 x 10mm pan head screws

Unpacking Instructions

NOTE: Intermixing blades between fans can
cause excessive wobble. Keep blades in original
sets of three.
3
Installed Wire Length
Up to 50 ft.
50-100 ft.
WARNING
!
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 6). If you feel
you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
7. Four M5 external tooth lockwashers
8. Two 8-32 knurled nuts
9.Two #8 external tooth lockwashers
10. Two 8-32 x 1-1/4" threaded studs
a
h
d
g
Wire Size A.W.G.
14
12
b
c
4
3
2
1
f
0
i
e
U.L. Model No.: CF765