Advertisement
QuickSpecs
Technical Specifications
System Unit
Dimensions
(H x W x D)
(with bezel)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
DA - 14394 North America — Version 17 — December 16, 2013
HP ProLiant BL660c Generation 8 (Gen8) Server Blade
366.27mm (14.42") x 56.54mm (2.23") x 516.67mm (20.34")
Maximum: 4 processors, 2
FlexibleLOMs, 32 DIMMs, 2
hard drives, 3 mezzanine
cards, and 2 flash cache
batteries installed
Minimum: 2 processors, 1
FlexibleLOM, and 2 DIMMs
installed
For power specifications including input requirements, BTU rating, and power
supply output, please see the:
HP BladeSystem c3000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/quickspecs/
12790_na/12790_na.html
NOTE: The ProLiant BL660c Gen8 requires the c3000 Enclosure to be
configured with 6 fans.
HP BladeSystem c7000 Enclosure QuickSpecs at
http://h18000.www1.hp.com/products/quickspecs/
12810_na/12810_na.html
NOTE: The ProLiant BL660c Gen8 requires the c7000 Enclosure to be
configured with 10 fans.
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at www.hp.com/go/hppoweradvisor.
Operating
Non-operating
Operating
Non-operating
Operating
27.1 lb (12.3 kg)
20.2 lb (9.2 kg)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1,000 ft) above sea level to a maximum
of 3,050 m (10,000 ft), no direct sustained
sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and
number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
3,050 m (10,000 ft). This value may be limited by
Page 42
Advertisement
