Using copy functions
3
Touch the button for the desired settings, and then touch [OK].
– If "1 > 2" or "2 > 2" is selected, touch [Output Bind Direction], select the
binding position for the copy, and then touch [OK].
– If "Auto" is selected, the binding margin is set at the top or at the left. The
binding position is automatically determined according to the orientation
of the loaded original. If the original length is 297 mm or less, a binding
position along the long side of the paper is selected. If the original length
is more than 297 mm, a binding position along the short side of the paper
is selected.
4
Touch [Close].
The Basic screen appears again.
Océ cm3522/cm2522
2
2-13