Handle the media messages
Illustration
[15] Example of a 'Media message'
How to handle the 'Media message' in the tray-to-tray mode
A message on the operator panel indicates that a media is missing. Select one of the fol-
1.
lowing actions as a response to the message.
Press 'Assign media'.
Continue with step 2 when you select this option.
Press 'Continue'.
The controller will use the PCL default media and continue the print job.
Note that this might be an incorrect media.
Press 'Cancel stream'.
The print job is stopped. You can now solve the problem. You will most likely be able
to solve the problem on the server.
Note:
Steps 2 and 3 apply only when you chose to assign a media.
26
Chapter 2 - Transaction printing