Oce VarioPrint 6000 MICR series User Manual page 19

Press the 'Transaction printing mode' button.
3.
The text on the button changes from 'Off' to 'On'.
Press the 'Active transaction setup' button and select the required setup.
4.
The attributes of the transaction setup are defined in the Settings Editor application on
the Controller.
Load the required media into the paper trays.
5.
Press the 'Transaction on-line' button.
6.
The text on the button changes from 'Off' to 'On'.
On the server, connect to the printer and start the job.
7.
Note:
When a job is ready, you can start another transactional job or switch back to the docu-
ment printing mode.
Switch to the document printing mode
On the operator panel, press the 'System' button.
1.
Press the 'Transaction' button.
2.
Press the 'Transaction on-line' button.
3.
The text on the button changes from 'On' to 'Off'.
Note that you can only switch the 'Transaction on-line' function to off-line when
the transaction stream is ready
the printer contains no more print data
the printer has stopped normally (not due to an error).
When you switch the 'Transaction on-line' function to off-line, the connection to the
host is disconnected.
Press the 'Transaction printing mode' button.
4.
The text on the button changes from 'On' to 'Off'.
Activate the transaction printing function
Chapter 2 - Transaction printing 19