Illustration
[13] Activated MICR mode
Activate the MICR mode
Create a transaction printing setup (see
1.
In the Settings Editor, go to 'Transaction printing' - 'Settings'.
2.
Select 'PCL' or 'IPDS'
3.
Check the 'MICR mode (if licensed)' box.
4.
Note:
When you select 'IPDS', you can also activate the 'Output recovery' setting by putting
a check mark in the box (see
Go to 'Transaction Printing' - 'Setups', select the required Setup, then click 'Load'.
5.
On the operator panel, activate the'Transaction printing mode' function in the 'System'
6.
view (see
'Activate the transaction printing function' on page
'Create a transaction setup' on page
'Error handling and secure printing' on page
Activate the MICR mode
18).
Chapter 2 - Transaction printing
28).
32).
21