Table of Contents
Advertisement
Reboot
Users should reboot the phone when prompted. The phone may prompt a reboot
after applying specific changes to phone configuration.
To reboot via Web interface:
1) Go to SYSTEM[UPGRADE.
2) Click REBOOT button.
Note: Please do not power off during reboot, or it may cause a flash memory error.
Customizing The Phone
General Settings
Phone Status
Users can view the status of the phone using the phone interface or the web interface.
This option allows users to review:
• IP
• MAC (Machine Access Control) address
• Firmware
• Network: MAC, LAN, Netmask, Gateway, DNS, etc
• Phone: Model, Hardware, Firmware, Product ID and MAC
• Accounts: The status of the 3 SIP accounts
To check the Phone Status via phone interface:
Press the OK button to check the IP, MAC address and Firmware version.
Use the navigation keys to check the other information.
To view the Phone Status via web interface:
Open a web browser and input the IP Address of the phone. Enter login and pass-
word (default login and password are admin and admin).
Select STATUS [HARDWARE STATUS.
Status
1. IP: 192.168.0.120
2. MAC: 30c6be00011a
3: Firmware: 1.0.2683
BACK
17
16
Advertisement
Table of Contents
