6.0 Specification
Electrical interface
6.1
6.1.1 Connector location
Refer to the following illustration to see the location of the connectors.
Figure 17. Connector location (2 and 3 disk model shown)
6.1.1.1 DC power connector
The DC power connector is designed to mate with AMP part number 1-480424-0 using AMP pins
part number 350078-4 (strip), part number 61173-4 (loose piece), or their equivalents. Pin assignments
are shown in the figure below.
4
3
2
Figure 18. Power connector pin assignments
6.1.1.2 AT signal connector
The AT signal connector is a 40-pin connector.
Pin
Voltage
1
1
+12 V
2
GND
3
GND
4
+5V
Deskstar 120GXP hard disk drive specifications
21