R
Input parameters from the device
Sector Count
Sector Number
Cylinder High/Low
H
The retry bit. This bit is ignored.
The number of requested sectors not transferred. This will be zero unless an
unrecoverable error occurs.
The sector number of the last transferred sector. (L=0)
In LBA mode this register contains current LBA bits 0 - 7. (L=1)
The cylinder number of the last transferred sector. (L=0)
In LBA mode this register contains current LBA bits 8 - 15 (Low), 16 - 23 (High).
(L=1)
The head number of the sector to be transferred. (L=0)
In LBA mode this register contains current LBA bits 24 - 27. (L=1)
Deskstar 120GXP hard disk drive specifications
129