Identification; Labels; Electromagnetic Compatibility; Ce Mark - IBM DTTA-351010 - Deskstar 10.1 GB Hard Drive Specifications

6.10 Identification

6.10.1 Labels

The following labels are affixed to every disk drive .
1. A label containing IBM logo, IBM part number and the statement 'Made by IBM' or equivalent.
2. A label containing drive model number, date code, formatted capacity, place of manufacture, and
UL/CSA/TUV/CE/C-Tick mark logos.
3. A bar code label containing the drive serial number.
4. A label containing jumper pin description.
The labels may be integrated with other labels.

6.11 Electromagnetic Compatibility

The drive, when installed in a suitable enclosure and exercised with a random accessing routine at maximum
data rate, shall meet the worldwide EMC requirements listed below.
IBM will provide technical support to assist users in complying with the EMC requirements.
United States Federal Communications Commission (FCC) Rules and Regulations (Class B), Part 15.
European Economic Community (EEC) directive number 76/889 related to the control of radio fre-
quency interference and the Verband Deutscher Elektrotechniker (VDE) requirements of Germany
(GOP).

6.11.1 CE Mark

The DTTA-3xxxxx complies with EC directive 89/336/EEC. CE mark for the certification is indicated on
the drive label.

6.11.2 C-Tick Mark

The DTTA-3xxxxx complies with the following Australian EMC standard.
Limits and methods of measurement of radio disturbance characteristics of information technology
equipment, AS/NZS 3548:1995 CLASS-B.
58
O E M Specifications for DTTA-3xxxxx