6.0 Specification
6.1 Electrical interface specification
6.1.1 Connectors
6.1.1.1 Power
The DC power connector is designed to mate with AMP (part 1-480424-0) using AMP pins (part 350078-4)
strip or (part 61173-4) loose piece, or their equivalents. Pin assignments are shown below.
Figure 14. Power Connector Pin Assignments
6.1.1.2 AT Signal Connector
The AT signal connector is a 40-pin connector.
Copyright IBM Corp. 1998
Pin
Voltage
1
+ 12 V
2
G N D
3
G N D
4
+ 5 V
19