Input Parameters From The Device
Sector Number
In LBA mode, this register specifies current LBA address bits 0-7. ( L = 1 )
Cylinder High/Low
In LBA mode, this register specifies current LBA address bits 8-15 (Low), 16-23
(High)
H
In LBA mode, this register specifies current LBA address bits 24-27. ( L = 1 )
Error
The Error Register. An Abort error ( A B T = 1 ) will be returned under the following
condition:
In LBA mode, this command formats a single logical track including the specified LBA.
No spare data sector to be assigned.
103
Command Descriptions