ATCOM AT820 User Manual page 37

AT820 Series User Manual
Set speed dial number for 2-9. For example, set 6750 for key 2, then user can call 6750
by call 2.
5.5.3.2 Call Forward
A. Always Target: Set a target number that forward all the incoming call to.
B. Busy Target：Set a target number that forward the incoming call to when user's
phone is busy.
C. No Answer: Set a target number that forward the incoming call to when no one
answer it.
D. After Ring Time (Seconds): Forward the incoming call to the no answer target after
the time that set here. Default to 5 seconds. Range from 3~60 seconds.
If Always forward, Busy forward and No answer forward are both enabled, IP phone will
implement always forward by priority. That is to say, all incoming calls will be forwarded
to the always target number.
5.5.3.3 Call Settings
A. Do Not Disturb: Whether to enable do not disturb function or not. The phone cannot
receive any incoming call but show the missed call informations if specifies it as "Yes".
B. Call Waiting:Whether to enable call waiting function or not. The phone can receive a
new call even if it is in busy the time a new call is coming if specifies it as "Yes".
C. Block Call ID:Whether to enable block call id function or not. The phone will call
others as anonymous while enable it.
D. Block Anc Call: Whether to enable block anc call function or not. The phone will reject
anonymous caller while enable it.
E. Auto Answer: Whether to enable auto answer function or not. The phone will answer
the incoming call automatically through headset or hand-free while enable it.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
37