Access Mode; Move The Cursor; Web Settings - ATCOM AT820 User Manual

AT820 Series User Manual
4. Press "Reply" to reply the SMS, or press "Delete" to delete this SMS.
5. Press "Cancel" to exit.

4.10 Access Mode

There are two kinds of web access mode for AT820 series: admin mode and user mode.
User could view and configure all items in admin mode, while user couldn't change the
SIP configuration as well as server address and port but only access and view the
information. User would enter different mode after input different web address and user
name and password:
A. Administrator mode
Web address: the phone's IP/index.asp.
User Name: admin.
Password: default password is none.
B. User mode
Web address: the phone's IP/user.asp.
User Name: user.
Password: default password is none.

4.11 Move the cursor

If user wants to modify the content when inputting information on the phone, please
press navigation button "Right" at first, then user will see "<<"soft key and ">>"soft key.
Use "<<" to recede the cursor and ">>" to linefeed.

5. Web settings

Input the phone's IP addresses in the web browser and press "Enter" button, it will go to
the web interface of the user mode .Click on "admin" at right of the web page, user can
config the phone from the web then.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
22