Using Ese Coffee Pods; The Espresso Shot - Dualit dcm2x Instruction Manual & Guarantee

USING ESE COFFEE PODS

ESE (Easy Serving Espresso) pods are individually wrapped and pre-tamped ensuring the perfect
espresso every time. Look for the ESE logo on compatible coffee pods.
1 2
PURCHASE PODS THE ESE FILTER
Coffee pods are available Select the ESE pod filter and
directly from retail outlets, snap into the filter holder.
www.dualit.com/coffee-pods
or call Dualit sales on 01293
652 500 (UK delivery only).
4 5
CHECK SEAL TUCK TAB
Make sure there is no gap Make sure all the paper
between the pod and filter is tucked inside the filter
edge, or water will flow before attaching the filter
round the pod and your holder to the brewhead.
espresso will be diluted.
3
INSERT POD
Place one fresh coffee pod
into the ESE filter. Each pod
is individually wrapped so you
only use what you need.
6
REMOVE WITH
TAB
Use the tab to remove the
pod once the coffee has
been made.
12

THE ESPRESSO SHOT

The basis of all the coffee drinks is the espresso shot.
1 2
ATTACH HOLDER CUPS OR MUGS
LOCK
Align the holder with the Place 1 or 2 warmed cups or
open lock symbol, insert,
a mug under the nozzles of
then rotate 60 past the
o
the filter holder. Make sure
closed lock symbol.
your cups are directly under
both nozzles.
Ensure the holder is
fully locked before
dispensing.
4 5
EXTRACTION TURN OFF
The espresso will flow out of the When the cup has been filled
filter nozzles. This may take a few to the desired level (about 15-
seconds. The temperature light 20 seconds for an espresso)
may cycle on / off; this is normal. turn the control knob to the
'0'. Then press the power
button and UNPLUG
AFTER EACH USE.
3
TURN ON
To extract your espresso,
turn the control knob anti-
clockwise to the cup symbol.
You will hear the pump
operating.
6
CLEAN FILTER
When using the filter holder,
knock out the grounds over
a bin. Rinse the filter under
running water to remove any
coffee grounds. Use the filter
pin to unblock if required.
13