Table of Contents
Advertisement
RECORDING IMAGES IN THE NORMAL RECORDING AREA
Timer recording
The monitored images can be recorded automatically by setting start and end times for each day of the week.
Insert the power cord into a wall outlet and turn on the
1
power.
The POWER indicator illuminates, and after approximately 15 seconds, the
EXIT/OSD indicator illuminates. The camera images appear on the monitor,
POWER
and the operating display appears in the top-left corner of the screen.
Note: The operating display can be moved or switched off by pressing the
EXIT/OSD
1 Setting the time
2
Press the MENU button to display the LANGUAGE/CLOCK SET menu, and
set the date and time. After the setting has been made, press the EXIT/OSD
MENU
button, the date and time appear in the operating display. (See page 40.)
2 Set the timer.
Press the MENU button to display the TIMER SET menu, and then set the
start and end times for timer recording. (See page 48.)
Then press the EXIT/OSD button.
Press the TIMER button.
3
The TIMER indicator illuminates and the digital video recorder switches to
timer recording standby mode.
TIMER
Note:
English
EXIT/OSD button repeatedly.
See page 11 for details of the operating display.
If SET in the TIMER SET menu is not set to "ON", or if the timer settings
are not made correctly, an alarm will sound when the TIMER button is
pressed.
The TIMER indicator illuminates when the timer setting has been made
correctly.
When the timer setting time is reached, the TIMER indicator and the REC
indicator illuminate and timer recording starts.
If you press the TIMER button during timer recording, the TIMER indicator
and the REC indicator switch off and timer recording stops.
13
Operating display
Advertisement
Table of Contents
