replacing the Blade
warning
injurY: return guard to
original position and secure in
place after replacing blade.
1.
Unplug the tool from its power source.
2.
Lock the blade assembly in the raised
position by pushing in the Locking Pin.
looSen SCrew
3.
Loosen the Screw that holds the
center cover in place.
SKU 96698
For technical questions, please call 1-800-444-3353.
to reduCe riSK
oF SeriouS
4.
Remove the Center Cover Fixing
Bolt.
5.
Move the center cover out of the way.
Spindle loCK
6.
Push in the Spindle Lock to hold the
Blade in place.
remoVe SCrew
Center
CoVer
Page 16