SCSI Card 2940UW Pro User's Reference
Using SCSI Select Settings
To select an option, use the
option, then press Enter.
In some cases, selecting an option displays another menu. You can
return to the previous menu at any time by pressing Esc.
To restore the original SCSISelect default values, press F6 from the
main SCSISelect screen.
Basic Host Adapter Options
Host Adapter SCSI ID—Sets the SCSI ID for the SCSI card.
The SCSI Card 2940UW Pro is set at 7, which gives it the
highest priority on the SCSI bus. We recommend you do not
change this setting.
SCSI Parity Checking—When set to Enabled, verifies the
accuracy of data transfer on the SCSI bus. Leave this setting
enabled unless any SCSI device connected to the SCSI card
does not support SCSI parity.
Host Adapter SCSI Termination—Determines the termination
setting for the SCSI card. The default setting is Automatic. We
recommend that you leave this setting at Automatic.
Boot Device Options
Boot Target ID—Specifies the SCSI ID of your boot device.
Boot LUN Number—Specifies which LUN (Logical Unit
Numbers) to boot from on your boot device. Multiple LUN
Support must be enabled (see Advanced Configuration Options
on page 18).
16
and
keys to move the cursor to the