Table of Contents
Advertisement
5
SEARCHING FOR RECORDED VIDEO
To view alarm video before or after the current
playback
1
Press the appropriate [ALARM] button
during playback.
ALARM
Each time the "
" button is pressed, playback will
skip to the preceding alarm video recording.
Each time the "
" button is pressed, playback will
skip to the subsequent alarm video recording.
When playback is performed after an alarm search, the frame
at the start and end of each alarm recording will be paused.
Press the appropriate [ALARM] button to play the
previous or next alarm recording.
You can use the front-panel buttons, the shuttle dial,
and the jog dial to perform operations such as pause
and fast-forward.
Alarm thumbnail search
Use the following procedure to display all of the alarm
recordings stored in the alarm recording area as
thumbnails list.
1
Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH>
screen is displayed.
SEARCH
2
Turn the jog dial and select "ALARM
THUMBNAIL SEARCH".
English
01-01-04 00:00:00
EN A ALARM 0000
02
<SEARCH>
ALARM SEARCH
->
ALARM THUMBNAIL SEARCH
->
TIME/DATE SEARCH
->
ARCHIVE AREA SEARCH
->
MOTION DETECTION SEARCH
->
MOVE:JOG SELECT:SHUTTLE
3
Turn the shuttle dial clockwise.
The nine most-recent alarm recordings are displayed.
An alarm number is indicated together with each alarm
recording, and the number of the currently selected
recording will flash.
4
Turn the jog dial to select the alarm
recording for playback.
The alarm number for the selected recording will start to
flash.
To display the next or previous recording
Turn the jog dial clockwise or counter-clockwise
accordingly.
To leave search mode
Press the [SEARCH] button. SEARCH indicator turns
off.
5
Turn the shuttle dial clockwise.
The selected recording is played back in full screen mode.
To view pre-alarm video
After beginning playback of an alarm recording identified
by an alarm search, use the shuttle dial to reverse
playback.
In the same way as for alarm searching, playback is
only possible within each individual alarm recording.
Press the appropriate [ALARM] button to play the
previous or next recording.
You can use the front-panel buttons, the shuttle dial,
and the jog dial to perform operations such as pause
and fast-forward.
15
0016
0015
0014
0013
0012
0011
0011
0011
0010
0009
0008
Advertisement
Table of Contents
