B
N
S
ASIC
ETWORK
ETTINGS
6.0 System Setup
The following sections explain the features and functionality of the ERB300H/ERB150H in universal repeater mode (URM), client
bridge mode (CBM) and client router mode (CRM).
Note:
If a feature or function does not apply to all modes, a note indicates which modes are applicable. Otherwise, it is assumed the feature
or function applies to all modes.
6.0.1 Operation Mode
Set the primary function of the device to act as a universal repeater, client bridge or a client router. The function that is selected
affects which items are available in the main menu.
Operation Mode
Select Universal Repeater to extend the router/AP signal
coverage or Client Bridge to function as a bridge for other network devices.
Router Function
Select Enable to configure the device as a router or Disable to
function as a client bridge. This feature is only available in client bridge mode.
Figure 6-1: Universal Repeater Mode
6-1
S
S
YSTEM
ETUP
(URM)