Alarm I/O Submenu - Bosch DINION 5000 Installation Manual

DINION capture 5000/7000
Item
Set Backfocus
now
Set LVL
EXIT
4.6.3

Alarm I/O submenu

Item
Alarm input
Alarm action
Bosch Security Systems, Inc.
Selection
Selection
None, high,
low
None,
Mode 1 to 6,
Mono
Installation Manual
Description
Select to fully open the iris. Follow the
instructions below for setting the
backfocus for your particular lens type.
After focusing the object of interest
remains in focus under bright and low
light conditions.
Only for video-iris lenses.
Adjust the level control on the lens to
center the level detector indicator (see
below).
Returns to Install menu.
Description
Select none to disable the alarm input.
Select active-high or active-low for the
alarm input connector.
Note: Overview camera - DINION
capture 7000 only.
Selects the switch-to mode of
Automatic Mode Switching for the
license plate camera, default is Mode
2.
In the overview camera on DINION
capture 7000 models, selects the
operating mode of the camera when
the alarm input is active.
Configuration | en
| 1.0 | 2012.01
47