Alarm Status Submenu - Bosch VG4-200 User Manual

24 en | On-Screen Display Menu Navigation
Menu
Video Loss Events
ExtComm Error
Events:
(IP comm modules
only.)
2.11.1

Alarm Status Submenu

This menu displays the status of the alarm inputs, alarm outputs and the pressure alarm.
Menu items marked with the ‡ symbol are available only with VG4 Pressure Domes.
Exit...
Alarm Input 1
Alarm Input 2
Alarm Input 3
Alarm Input 4
Alarm Input 5
Alarm Input 6
Alarm Input 7
Pressure‡
Alarm Output 1
Focus / Iris: Save and Exit
Menu
Exit
Alarm Input 1...7
Pressure
Alarm Output
VG4 Pressure Dome Alarm
The OSD displays a blinking low pressure alarm (*** LOW PRESSURE ***) when the internal
pressure of a VG4 Pressure Dome falls below the recommended level. Press OFF-65-ENTER
on the keyboard to acknowledge the alarm. The AutoDome, then, replaces the blinking alarm
message with a static "LP." The "LP" remains on the OSD until the internal pressure of the
AutoDome is raised above the recommended level.
F.01U.133.267 | 6.0 (IP4) | 2009.06
Description
Displays the number of time that video
was lost.
Displays the number of times that the IP
communications module lost internal
communication with the System
Controller.
Alarm Status
High
High
Open
Open
Open
Open
Open
OK
Open
Description
Saves and exits the menu.
Displays the status of alarm
inputs 1 through 7.
Displays the status of the
Pressure alarm
Displays the status of the alarm
output.
User's Manual
VG4 AutoDome Modular Camera System
Sub-menu / Description
Options
High
Low
Open (Normally Open)
Closed (Normally Closed)
OK: The internal pressure inside
the AutoDome is at or above the
recommended level.
Low: The internal pressure
inside the AutoDome is below
the recommended level. Refer to
the AutoDome Modular Camera
System Installation Manual for
instructions on recharging the
pressure.
Bosch Security Systems, Inc.