DINION capture 5000/7000
Note:
When VMD is enabled, normal light fluctuations or
environmental factors can contribute to false-positive alarms.
Because of this, it is recommended that you do not connect the
VMD-triggered alarm output of the camera to a monitored alarm
system as the false-positive alarms may be considered a
nuisance.
4.6
Install menu structure
Refer to Section 4.1 Menus, page 28, to access the Install menu.
Item
Lens Wizard
Language
Privacy
masking
Alarm I/O
Connections
Test signals
Camera ID
Defaults
Bosch Security Systems, Inc.
Selection
Submenu
Submenu
Submenu
Submenu
Submenu
Submenu
Submenu
Submenu
Installation Manual
Description
Select to optimize the camera-lens
combination backfocus point.
Select on-screen display (OSD)
language
Sets up a masking area
Program the alarm input and output
functionality.
Connection parameters
Test patterns and texts
Select to access ID submenu
Returns all settings for all modes to
factory defaults
Configuration | en
| 1.0 | 2012.01
45