Synchronization Submenu; Alarm I/O Submenu - Bosch LTC-0498-28W Installation Manual

Dinion2X
5.6.3

Synchronization submenu

Item
Synchroniza-
tion
Horizontal
phase
Subphase
EXIT
5.6.4

Alarm I/O submenu

Item
Alarm input
Alarm action
Bosch Security Systems
Selection
Internal
Line lock
HV lock,
Genlock,
-25 . . 0 . . +25
0, 2 . . . 358
Selection
None, high,
low
None,
Mode 1 to 6,
Mono
Installation Manual
Description
Internal - for free running camera operation.
Line lock - to lock to the AC power supply
HV lock - locks the camera to the sync signal
supplied to the SYNC connector.
Genlock - locks the camera's subcarrier to the
signal supplied to the SYNC connector.
Adjusts the horizontal phase offset.
Adjusts the subcarrier phase.
Returns to Install menu.
Description
Select none to disable the alarm input. Select
active-high or active-low for the alarm input
connector.
Selects the operating mode of the camera
when the alarm input is active.
Configuration | en
AR18-08-B013 | v1.0 | 2009.03
37