Advertisement
Available languages
Available languages
MAIN FEATURES
1 High-speed laser copying
Since warm-up time is zero, copying can be started
immediately after the power switch is turned on.
First-copy time is only 9.6 seconds (normal mode).
Copying speed is 12 copies/min. which adapts to
business use, allowing improvement of working
efficiency.
2 Digital high-quality image
High-quality image copying with 600 dpi can be
performed.
In addition to the automatic exposure mode, the
manual exposure can be adjusted in five steps.
The photo mode copying function which allows clear
copying of delicate halftone original images such as
monochrome photos and color photos can be used.
3 Substancial copying functions
Zoom copying from 50% to 200% in 1% increments
can be performed.
A maximum of 99 copies can be selected.
Toner save mode for reducing toner consumption by
approximately 10% can be set.
4 Environmentally friendly design
Paper output tray is housed in the copier for space
saving.
Preheat mode and auto power shut-off mode are
provided to reduce power consumption in standby
mode.
5 Printer feature
This copier is also a laser printer.
GB-6
LOADING COPY PAPER
1. Raise the handle of the paper tray and pull the tray out
until it stops.
2. Adjust the paper guides on the paper tray to the copy
paper width and length. Squeeze the lever of paper
guide a and slide the guide to match with the width of
the paper.
Move paper guide b to the appropriate slot as marked
on the tray.
b
3. Fan the copy paper and insert it into the tray. Make
sure the edges go under the corner hooks.
Do not load paper above the maximum height
line (
). Exceeding the line will cause a paper
misfeed.
4. Gently push the paper tray back into the copier.
After loading copy paper, to cancel the blinking
"P" without restarting copying, press the clear
(
>
) key. The "P" in the display will go out and
the ready (
) indicator will light up.
a
Advertisement
Chapters
