Download Print this page

Cautions - Olivetti d-Copia 12 Copier Operation Manual

Digital copier
Hide thumbs Also See for d-Copia 12:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

CAUTIONS

Follow the cautions below when using this copier.
The fusing area is hot. Exercise care in this area when
removing misfed paper.
Do not look directly at the light source. Doing so may
damage your eyes.
Do not switch the copier rapidly on and off. After
turning the copier off, wait 10 to 15 seconds before
turning it back on.
Copier power must be turned off before installing any
supplies.
Place the copier on a firm, level surface.
Do not install the copier in a humid or dusty location.
When the copier is not used for long time, for example
during prolonged holidays, turn the power switch off
and remove the power cord from the outlet.
Caution
This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA
KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VARNING
OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING, SOM
ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
When moving the copier, be sure to turn the power
switch off and remove the power cord from the outlet.
Do not cover the copier with a dust cover, cloth or
plastic film while the power is on. Doing so may pre-
vent heat radiation, damaging the copier.
Use of controls or adjustments or performance of
procedures other than those specified herein may re-
sult in hazardous radiation exposure.
CLASS 1 LASER PRODUCT
Invisible laser radiation when open and inter-
locks defeated. Avoid exposure to beam.
At the production line, the output power of the
scanner unit is adjusted to 0.8 MILLIWATT
PLUS 13.4 PCTS and is maintained constant
by the operation of the Automatic Power
Control (APC).
Cautions on laser
Wave length
785 nm - 795 nm
Pulse times
11,82 µs/7 mm
Output power
0,17 mW ± 0,01 mW
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CLASS 1
LASER PRODUCT
LASER KLASSE 1
GB-5

Advertisement

loading