ZyXEL Communications P-27xx Series User Manual page 39

5.0.1 Resetting the ZyXEL Device
This changes all the ZyXEL Device's settings to their original values. You will need
to configure any custom settings again.
Note: Make a note of your custom settings before you reset the ZyXEL Device.
To reset the ZyXEL Device:
Press the RESET button until the POWER, PHONE 1, and PHONE 2/Lifeline
1
lights starts to blink in sequence. (This usually takes ten seconds or less.)
Release the RESET button.
2
5.0.2 REG Status List
REG Status allows you to see your SIP connection's current status. This can be
useful in diagnosing connection problems or troubleshooting why a call cannot go
through. REG Status information appears in two places: in the Connection
Wizard, after you finish setting up your VoIP connections:
Figure 14 The Connection Wizard
P-27XX Series User's Guide
Chapter 5 Troubleshooting
39