ZyXEL Communications P-27xx Series User Manual page 35

Click Maintenance > System > TR069 Setting to open this screen. Use this
screen to configure your ZyXEL Device to be managed by an ACS.
Figure 13 TR069 Setting
The following table describes the labels in this screen.
Table 11 TR069 Setting
LABEL
General
ACS Client
Enable
ACS URL
User Name
Password
Periodic Inform
Enable
Periodic Inform
Interval
Connection Request
User Name
P-27XX Series User's Guide
DESCRIPTION
Select Enabled to activate remote management via TR-069 on the
WAN. Otherwise, select Disabled.
Enter the URL or IP address of the auto-configuration server.
Enter the TR-069 user name for authentication with the auto-
configuration server.
Enter the TR-069 password for authentication with the auto-
configuration server.
Select Enabled to set the periodic inform time interval. Otherwise,
select Disabled.
Enter the time interval (in seconds) at which the ZyXEL Device sends
information to the auto-configuration server.
Enter the connection request user name.
When the ACS makes a connection request to the ZyXEL Device, this
user name is used to authenticate the ACS.
Chapter 4 Maintenance
35