Back Of The Switch; Power Connector - HP 5400 zl Installation And Getting Started Manual

Introducing the HP 5400 zl Switches

Back of the Switch

Back of the Switch
.
Figure 1-5. Back of a 5406 zl switch with one power supply
Figure 1-6. Back of a 5412 zl switch with two power supplies

Power Connector

The Series 5400 zl Switches do not have a power switch; they are powered on
when connected to an active AC power source. The 5400 zl switches automat-
ically adjust to any voltage between 100-127 and 200-240 volts when using the
J8712A power supply, 200-240 volts when using the J8713A power supply, and
110-127 and 200-240 volts when using the J9306A power supply, and either 50
or 60 Hz. There are no voltage range settings required.
1-14
AC power connector
Grounding lug
mounting holes
Slot for installing optional
redundant power supply
Power and Fault LEDs
External PoE
power connectors