Heat & Glo Townsend I Installer's Manual page 19

Continue adding vent
components, locking
each succeeding
component into place.
Use wall brackets to
support vertical runs
every 8 feet (2.4m)
above the stove vent
outlet.
Figure 12. Adding Venting Components
3. Install Support Brackets
For Horizontal Runs - The vent system must be
supported every 5 feet (1.5m) of horizontal run by a
horizontal pipe support.
To install support brackets for horizontal runs:
• Place the pipe supports around the vent pipe.
• Nail the pipe supports to the framing members.
For Vertical Runs - The vent system must be
supported every 8 feet (2.4m) above the stove vent
outlet by wall brackets.
To install support brackets for vertical runs:
• Attach wall brackets to the vent pipe and secure the wall
bracket to the framing members with nails or screws.
Figure 13. Installing Support Brackets
16