Table of Contents
Advertisement
4-10
3. Server Setup Menu
Enable Printed Queue
Enable Printed Q
Yes
Function: The setting determines if the print queue is used.
Operation: Use the M and L keys to switch the Yes/No setting. Press the Set key to display the next
item [Jobs to Save]. If "No" is set, [Save Change] is displayed if the Set key is pressed.
[Save Change] will be displayed if the Cancel key is pressed midway through the
process.
Jobs to Save
Jobs to Save
10
Function: When the print queue is used, (the previous item [Print Queue] is set to "Yes") the
number of jobs that are stored in the queue is set.
Operation: Use the M and L keys to switch the display of the numeric characters. Use the
key to shift the cursor (underlined section). Repeat this operation to set the number
of jobs.
After the setting is made, press the Set key to display [Save Change]. After the
setting is performed, press the Set key to display the following item, [Save
Change].
[Save Change] will be displayed if the Cancel key is pressed midway through the
process.
Save Change
Save Changes
Yes
Function: This setting determines whether the conditions set in the Server Setup menu are
saved or not.
Operation: Use the M and L keys to switch the display of the numeric characters. If "Yes" is set
and the Set key is pressed, the changed settings are saved and the main menu display
returns. If "No" is set and the Set key is pressed, the changes in the settings are not
stored and the main menu display returns.
NOTE
Any Other Menu Setup Procedures
See Chapter 2 "Performing Setup from the Control Panel" in the Administrator Guide.
Advertisement
Table of Contents
