Turning The Printer On/Off; Turning The Printer On - Canon LBP3200 User Manual

Turning the Printer ON/OFF

The power switch to turn ON or OFF the printer is located on the right side of the
printer. Be sure to observe the following instructions in order to prevent unexpected
problems.

Turning the Printer ON

In order to use this printer, you should press " " of the power switch to turn ON the
printer. After running a self-diagnostic test, the printer will be ready to print.
IMPORTANT
Do not turn ON the printer immediately after turning it OFF. After turning OFF the printer,
•
wait for 10 seconds or longer before turning it ON again.
If the printer does not operate properly, or an error message appears in the Printer Status
•
Window, see "Troubleshooting," on p. 6-1.
Before turning ON the printer, make sure that paper is not set in the manual feed slot. If
•
you turn ON the printer when paper is set in the manual feed slot, this may cause paper
jams.
When you turn the printer ON for the first time after you install the printer, a blank sheet
•
may be delivered. However it is not abnormal.
1
Press " " of the power switch to turn ON the printer.

Turning the Printer ON/OFF

1
1-11