Printing on Plain Paper / Heavy Paper / Label / Transparency
"LGL" indicated in the manual feed slot shows legal size, "LTR" shows letter size,
and "EXEC" shows executive size.
While holding paper with your hands as shown in the ﬁgure,
slowly insert paper with the printing surface face up until it
hits on the back.
After paper is set, it is fed slightly.
When setting paper, be careful not to cut your hands with the edges of the
Set the paper straight.
If the paper is curled or folded at corners, ﬂatten it before setting.
Be sure to align the paper guides with the width of the paper. If the paper guides
are too loose or too tight, this may result in misfeeds or paper jams.