Download  Print this page

Cleaning The Printer - Canon LBP3200 User Manual

Laser beam printer.
Hide thumbs

Advertisement

Cleaning the Printer

While you use the printer for a long period of time, when you find dust or dirt on the
outer surfaces, clean the printer. When cleaning the printer, be careful of the
following points in order to prevent an electrical shock or printer malfunctions.
WARNING
When cleaning the printer, first turn OFF the power switch, disconnect the USB
cable, then unplug the power plug. Failure to observe these steps may result in
a fire or electrical shock.
Do not use alcohol, benzene, paint thinner, or other flammable substances.
Check detergent for flammability prior to use. If flammable substances come
into contact with a high-voltage area inside the printer, it may result in a fire or
electrical shock.
5
IMPORTANT
Be careful not to use a cleaning agent other than water or a mild detergent diluted with
water, as this may deform or crack the plastic materials in the printer.
When using a mild detergent, be sure to dilute it with water.
Grease or oil does not have to be applied to this printer. Be sure not to apply grease or
oil.
1
5-16
Cleaning the Printer
Press "
" of the power switch to turn OFF the printer
disconnect the USB cable
the AC power outlet
b
, then unplug the power plug from
b b b b
.
c c c c
c
a
,
a a a a

Advertisement

Table of Contents

   Related Manuals for Canon LBP3200

This manual is also suitable for:

Laser shot lbp3200

Comments to this Manuals

Symbols: 0
Latest comments: