Turn On The Entire System Without Delays; Turning On All Or Selected Areas - Bosch D1265 Owner's Manual

D1265 | Owner's Manual | Part IV: Multi-Area Use

Turn On the Entire System Without Delays

You can use this function list function to turn on the
entire system, both perimeter and interior, without
delays. You might use this function in all of the areas
or some of the areas where your passcode has
authority. If there are areas already turned on, this
function rearms those areas in addition to turning on
(without delay) all authorized areas that are currently
off.

Turning on All or Selected Areas

Areas covered in the scope of the keypad can be
armed individually by accessing the Master Arm
function through the menu.
1. Press the Menu button to enter the function list.
2. Press the Next button repeatedly until you
reach the Master Arm Instant button, and then
press it.
3. You might be prompted for your passcode. It
appears on the display as asterisks (*).
4. The display changes and shows Master Arm
All with the following options:

Previous button– scrolls to the last area that
can be armed (based on passcode and authority
level)

Next button – scrolls to the first area that can
be armed (based on passcode and authority
level)

Arm button – arms all areas (based on passcode
and authority level)

Exit button – returns the display to idle text
5. If the Next button is pressed, the first area that
can be armed (based on passcode entered and
user authority level) is shown (AREA 1
WAREHOUSE is used an example of the first
area that can be armed).
64
6. Pressing the Arm button causes AREA 1
WAREHOUSE is now arming... to display for
3 sec before the prompt to arm the next
available area is shown.
7. To instantly arm all the areas that are within the
scope of the keypad, press the Arm button.
8. This display changes to show On Instant
indicating that the areas are armed.
Bosch Security Systems, Inc. | 9/10 | F01U169130-02