Turning Off The System; Turning Off Multiple Areas With A Passcode; Turning Off Multiple Areas With Disarm All - Bosch D1265 Owner's Manual

Turning Off the System

Turning Off Multiple Areas with a Passcode

This function is useful for turning off multiple areas
with a few button presses. It is quicker than disarming
several areas independently. Your passcode must have
the proper authority level for each area.

After enter your passcode, the following shows
Disarm: 12345678 All user-authorized areas are
now disarmed. (Not all area number might
appear due to what areas are in the scope of the
keypad.

When an area is turned on (armed), you must
enter a door programmed for entry delay time.
Opening the door, starts the entry delay time.
Failing to turn off the system before the entry
delay time expires or entering through a door not
programmed for entry delay time, causes an alarm.

If this happens, silence the alarm by entering your
personal passcode and pressing ENTER. Call your
security company to let them know that it is not an
emergency situation.

Turning Off Multiple Areas with Disarm All


This function turns off multiple areas with a few
button presses. It is quicker than disarming several
areas independently. Your passcode must have the
proper authority level for each area. This function
works the same as entering your passcode to
disarm, but allows the Disarm All feature to be
included in the function list.

When an area is turned on (armed), you must
enter a door programmed for entry delay time.
Opening the door, starts the entry delay time.
Failing to turn off the system before the entry
delay time expires or entering through a door not
programmed for entry delay time, causes an alarm.

If this happens, silence the alarm by entering your
personal passcode and pressing ENTER. Call your
security company to let them know that it is not an
emergency situation.
1. The display initially shows that the system is
armed.
2. Press the Menu button to enter the function list.
3. Press the Next button repeatedly until you
reach the Disarm Menu button, then press it.
Bosch Security Systems, Inc. | 9/10 | F01U169130-02
D1265 | Owner's Manual | Part IV: Multi-Area Use
4. If entering through a door which is part of an
area that is armed, the display instructs you to
enter your passcode to disarm.
5. Enter your passcode and press ENTER.
The passcode is shown as asterisks (*) when
entered and advance from the right side of the
display to the left until all the passcode digits
are entered.
6. If the entered passcode is valid, the display
changes to show Disarm All.
Press the Disarm button to disarm all armed
areas.
Press the Next button to go to the first armed
area (refer to Turning Off Selected Areas on page
66).
Press the Previous button to go to the last
armed area.
Press the Exit button to return to idle text.
7. If the Disarm button is pressed to disarm all
areas, the display changes to show Disarm:
12345678 All user-authorized areas are now
disarmed indicating that all areas are being
turned off. Keypad scope and/or your authority
level limit the actual number of areas you might
turn off.
For example, if you have authority to disarm all
8 areas but the scope of the keypad you're using
is limited to areas 1, 2, and 5, then you only can
turn off areas 1, 2, and 5.
65