Chg Skeds (Cmd + 5 + 2); Description; Using Chg Skeds - Bosch D1265 Owner's Manual

D1265 | Owner's Manual | Part III: Advanced Commands

Chg Skeds (CMD + 5 + 2)

Description

A Sked is a function programmed to be performed
automatically at a scheduled time by your security
system. You can change the scheduled time for some
functions, disable the Sked and thus prevent it from
automatically happening or restart a previously
disabled Sked. Contact your security representative to
determine what Skeds might be programmed for your
system.
To change a Sked's time, enable a Sked, or disable a
Sked, follow the procedure below to first select the
Sked from a list of Skeds programmed for your system.

Using Chg SKEDS

1. Ensure your keypad shows idle disarmed text.
2. Press the CMD button. The display shows
*System Command*.
3. Press the 5 button and then the 2 button.
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
Press the Next button repeatedly.
When you reach the Change Skeds
button, press it.
4. The number of the first Sked programmed into
your system is shown, plus either its time or an
indication that it is disabled.
Press the Next button to scroll through the list
of Sked numbers to find the one you wish to
change.
Your alarm system might be programmed with
up to 40 Skeds. If the Sked number being
shown is not programmed, the keypad shows
Skd11 – No program.
44
X
When an appears in the Sked display, it is an
indication that "Except on Holidays" is enabled.
Specific holidays are programmed by your
security company.
*
When an appears in the Sked display, it is an
indication that the Sked has or happens today.
5. If the Sked is currently enabled, the sked is
shown with Disable this sked on the second
line. Press the adjacent button.
6. The display changes to show that the sked is
disabled.
If the Sked is currently disabled, the display
reads Skd 1 is disabled.
Press the Enable this sked button.
7. The display shows two buttons:

Only on holiday
Pressing this button enables the sked only
on holidays and change the first line of the
display to Skd 1 X 08:00AM without the X.

Except on holiday
Pressing this button disables the sked on
holidays and change the first line of the
display to Skd 1 08:00am with the X.
Consult your security company and
determine which holidays have been
programmed in your system.
The display changes to allow a new time to be
entered.
Enter the new time using a 12-hour (HH:MM)
format.
For example, if the desired time is 8:00, press 8
+ 0 + 0.
Press the ENTER button.
8. If the time is a valid time, the keypad display
changes to show the new time with a selection
of AM or PM.
Press the AM button to select AM.
Press the PM button to select PM.
9. The display shows the Sked with the new time.
Press the Exit button to return to idle text.
Bosch Security Systems, Inc. | 9/10 | F01U169130-02