Bosch D1265 Owner's Manual page 49

Contact your security company if you don't know what
user numbers, authority levels, or areas are available.
Refer to the Appendix on page 67 for further
information on adding passcodes.
Before you begin, keep these points in mind:

Do not try to add new users without knowing the
available user numbers. An already defined user
number is overwritten when the new user is
defined. These are two or three digit numbers, not
to be confused with passcodes that identify users at
your security company.

When choosing passcodes, choose a new passcode
three to six digits long. If you choose a passcode
with the same digit in consecutive order (for
example "33" in 334697), take care when entering
it.

To avoid conflicting with other passcodes and
duress codes, your system will not let you change
passcodes that are the same within plus or minus 2
of an existing passcode. For example, if 1234 were
an existing code, your system would not let you
add or change your code to 1232, 1233, 1234,
1235, or 1236.

Choose an authority level for each area. Not
assigning the authority level for an area denies the
passcode access to that area.
1. Ensure your keypad shows idle disarmed text.
2. Press the CMD button. The display shows
*System Command*.
3. Press the 5 button and then the 6 button.
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
Press the Next button repeatedly.
When you reach the Add/Change User
button, press it.
Bosch Security Systems, Inc. | 9/10 | F01U169130-02
D1265 | Owner's Manual | Part III: Advanced Commands
4. The display changes to show Add / Change
User Enter user #:
5. Enter the user number and press the ENTER
button.
6. The display changes to show the user number
entered and the user's name (if any).
(User 3 is used as an example.)
Press the Continue button to proceed on to
changing the user's information.
If there is no name for the user, the default user
name text appears in the second line.
(User 3 is used as an example.)
Press the Continue button to change the user's
information.
7. The display changes to Add/Change Menu
The display varies depending on the type of
control panel that was installed in your system.
Door access control in the control panel

(D9412GV2, D9412GV3, D7412GV2,
D7412GV2)
My system does not have door access

control in the control panel (D7212GV3,
D7212GV2)
.
49