Standard Displays - Bosch D1265 Owner's Manual

D1265 | Owner's Manual | Appendix

Standard Displays

Your keypad uses standard and custom displays to
show the status of the security system. Many standard
displays are described below. Your system might not
use all of them. Descriptions of your custom text
follow.
*System Command*
Shows when you press the CMD button. The system is
waiting for you to enter a one or two digit number to
complete the command.
Entry Delay/Enter Passcode to Disarm
When the system is turned on, entering through a
delay door starts entry delay time.
The keypad emits a tweedle tone and alternates
between Enter Passcode and press the ENTER
button to disarm and AREA # AREA TEXT is in
entry delay.
You must turn off the system before entry delay time
expires to avoid creating an alarm event.
Exit Now
Arming your system starts exit delay time. The keypad
emits a repeating beep tone and shows Exit Now!.
86
**No Authority**
The system will not recognize the passcode entered.
Perimeter On Delayed
Indicates that the perimeter is armed (turned on) with
entry/exit delay time and shows Perimeter On
Delayed. (Refer to Perimeter Delay (CMD + 3) on page
22).
Perimeter Instant
Indicates that the perimeter is armed (turned on)
without entry/exit delay time and shows Perimeter
On Instant. (Refer to Turn On the Perimeter With No
.
Delays on page 21 ).
Area must be disarmed first
Indicates that the function requested can only be
performed when the area is disarmed. Disarm the area
to perform the function.
Bosch Security Systems, Inc. | 9/10 | F01U169130-02