Add/Change User (Cmd + 5 + 6) - Bosch D1265 Owner's Manual

D1265 | Owner's Manual | Part III: Advanced Commands
If you prefer, you might use the function
list in place of Steps 2 and 3 to initiate
this function.
Press the Menu button to enter the
function list.
Press the Next button repeatedly.
When you reach the Change Passcode
button, press it.
4. You are prompted for your passcode.
As soon as a number is pressed, Entering:
appears on the third line next to the asterisks.
The passcode is shown as asterisks (*) when
entered and advance from the right side of the
display to the left until all passcode digits are
entered.
5. The display changes to Enter new passcode:
Enter the new passcode.
As soon as a number is pressed, Entering:
appears on the third line next to the asterisks.
The passcode is shown as asterisks (*) when
entered and advance from the right side of the
display to the left until all passcode digits are
entered.
6. Press the ENTER button.
If a duplicate passcode is entered, the keypad
momentarily reads Passcode is already in use.
Please try again.
48
7. If the new passcode is valid, the display changes
to Enter new passcode again:
Enter the new passcode again.
As soon as a number is pressed, Entering:
appears on the third line next to the asterisks.
The passcode is shown as asterisks (*) when
entered and advance from the right side of the
display to the left until all six passcode digits are
entered.
8. If the passcode matches the previously entered
passcode, the display changes to Passcode
changed.
If the passcode does not match, the keypad
emits an error tone and displays Passcode not
changed.
9. The display automatically returns to idle text
after 3 sec.

Add/Change User (CMD + 5 + 6)

Use this function to add or change a user to your
system without assistance from your security company.
You need to know which user numbers are available,
the authority level you want to assign to the new
passcode and the areas in which it is valid before you
add it.
The user numbers identify users in reports transmitted
from your system. Additionally, you are able to change
the following:

the authority level (which determines what system
functions the passcode can access)

the area number (which identifies which parts of
your security system the user has access to)

the name of the user

door access card or token they use for access
control

the door access card or token associated with the
Master or Sub-User.
Bosch Security Systems, Inc. | 9/10 | F01U169130-02