Table of Contents
Advertisement
7. Identify the Right Upper Body Arm (4) and the
Right Upper Body Leg (5), and orient them as
shown.
Insert the Right Upper Body Arm (4) into the
Right Upper Body Leg (5). Attach the Right
Upper Body Arm with three M8 x 38mm Bolts
(59) and three M8 Locknuts (60); make sure
that the Locknuts are in the hexagonal holes.
Do not fully tighten the Bolts yet.
Attach the Left Upper Body Arm (3) to the
Left Upper Body Leg (6) in the same way.
8. Slide the Right Upper Body Arm (4) onto the
right side of the Long Axle (18).
Slide the Left Upper Body Arm (3) onto the left
side of the Long Axle (18).
Tighten an M8 x 20mm Screw (61) with an Axle
Cover (44) and an M8 Washer (63) into each
end of the Long Axle (18) at the same time.
7
3
8
3
61
44
63
9
4
Hex agonal
Holes
60
60
59
59
6
5
18
4
63
44
61
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 475 E Elliptical and is the answer not in the manual?
Questions and answers
Do you have a manual for model number 831.23935.3
Like tonpurchase a battery cover
The document does not provide specific information on where to buy a battery cover for the Pro-Form 475 E Elliptical. However, it mentions that to purchase an optional power adapter, you should call the telephone number on the manual's cover. You may try contacting the manufacturer or checking online marketplaces that sell Pro-Form elliptical parts.
This answer is automatically generated
The resistance seems to be the same on all settings
The resistance on the Pro-Form 475 E Elliptical may feel the same on all settings due to an issue with the Reed Switch (33) or the Magnet (65). If the Reed Switch is not properly aligned with the Magnet, the console may not correctly detect or adjust resistance levels. Checking and realigning these components can help restore proper resistance function.
This answer is automatically generated