Licenses; System Overview - Bosch VG5 700 Series User Manual

AutoDome 700 Series IP PTZ Camera
Configuration
You can save configuration data for the AutoDome 700 Series on a computer and then load
saved configuration data from a computer to the unit.
Upload
1.
2.
3.
Once the upload is complete, the new configuration is activated. The time remaining is shown
by the message going to reset Reconnecting in ... seconds. The unit reboots automatically
once the upload has successfully completed.
Download
1.
2.
SSL certificate
To be able to work with an SSL encrypted data connection, both ends of a connection must
hold the relevant certificates. You can upload the SSL certificate, comprising one or multiple
files, onto the AutoDome 700 Series.
If you wish to upload multiple files onto the AutoDome 700 Series, you must select them
consecutively.
1.
2.
3.
The new SSL certificate is valid.
Maintenance log
You can download an internal maintenance log from the unit to send it to Customer Service
for support purposes. Click Download and select a storage location for the file.
4.57

Licenses

You can enter the activation key to release additional functions or software modules.
NOTICE!
The activation key cannot be deactivated again and is not transferable to other units.
4.58

System Overview

The data on this page are for information purposes only and cannot be changed. Keep a
record of this information in case technical assistance is required.
NOTICE!
You can select all required text on this page with the mouse and copy it to the clipboard with
the [Ctrl]+[C] key combination, for example if you want to send it via e-mail.
Bosch Security Systems, Inc.
Enter the full path of the file to upload or click Browse to select the required file.
Make certain that the file to be loaded comes from the same unit type as the unit you
want to configure.
Next, click Upload to begin transferring the file to the unit. The progress bar allows you
to monitor the transfer.
Click the Download button. A dialog box opens.
Follow the on-screen instructions to save the current settings.
Enter the full path of the file to upload or click Browse to select the required file.
Next, click Upload to begin transferring the file to the unit.
Once all files have been successfully uploaded, the unit must be rebooted. In the address
bar of your browser, enter /reset after the IP address of the AutoDome 700 Series (for
example 192.168.0.10/reset).
Configuring the AutoDome 700 Series | en
User Manual
65
F.01U.273.798 | 3.0 | 2012.08