Ptz Settings - Bosch VG5 700 Series User Manual

40 en | Configuring the AutoDome 700 Series
Maximum Zoom Speed
Controls the zoom speed. The default setting is Medium.
Zoom Polarity
Capability to reverse the operation of the zoom button on the controller.
–
–
Digital Zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process. Select Off to disable or On to enable this
feature. The default setting is On.
4.24

PTZ Settings

Auto Pan Speed
Continuously pans the camera at a speed between right and left limit settings. Type a value
between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be
executed.
–
–
–
Inactivity Period
Determines the behavior of the dome when the control for dome is inactive. Select a time
period from the pull-down list (3 sec. - 10 min.). The default setting is 2 minutes.
Auto Pivot
The Auto Pivot tilts the camera through the vertical position as the camera is rotated to
maintain the correct orientation of the image. Set the Auto Pivot to On (default) to
automatically rotate the camera 180º when following a subject traveling directly beneath the
camera. To disable this feature, click Off.
Freeze Frame
Select On to freeze the image while the AutoDome moves to a predetermined scene position.
Off is the default setting.
Auto Pan Left Limit
Sets the left Auto Pan limit of the camera. Use the preview window to move the camera to the
left pan limit and click the button. The camera will not move past this limit when in Auto Pan
Between Limits mode (AUX 2 ON).
Auto Pan Right Limit
Sets the right Auto Pan limit of the camera. Use the preview window to move the camera to
the right pan limit and click the button. The camera will not move past this limit when in Auto
Pan Between Limits mode (AUX 2 ON).
Tilt Up Limit
Sets the upper tilt limit of the camera. Use the preview window to move the camera to the tilt
limit and click the button.
F.01U.273.798 | 3.0 | 2012.08
Normal (default): zoom controls operate normally.
Reverse: zoom controls are reversed.
Off (default): camera remains on a current scene indefinitely.
Scene 1: camera returns to Preset 1.
Previous Aux: camera returns to the previous activity.
User Manual
AutoDome 700 Series IP PTZ Camera
Bosch Security Systems, Inc.