Bosch VG5 700 Series User Manual page 38

38 en | Configuring the AutoDome 700 Series
–
–
Maximum Gain Level
Controls the maximum value the gain can have during AGC operation. To set the maximum
gain level, choose from:
–
–
–
Sharpness
Adjusts the sharpness of the picture. To set the sharpness, type a value between 1 and 15
inclusive. The default setting is 12.
Shutter Mode
–
–
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is
gathered by the collecting device. The default setting is 1/60 second for NTSC and 1/50 for
PAL cameras. The range of settings is from 1/1 to 1/10000.
Backlight Compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be
underexposed or overexposed. Select On to optimize the video level for the central area of
the image. The default setting is Off.
High Sensitivity Setting
Adjusts the level of intensity within the image. Select from Auto WD, Off or On.
Stabilization
Turns on video stabilization.
Wide Dynamic Range
Turns on the wide dynamic range feature. Wide Dynamic Range improves image reproduction
in extreme high-contrast environments. Select from Off, On, or Auto Mode.
Night Mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following
options:
–
–
F.01U.273.798 | 3.0 | 2012.08
AGC (default): electronically brightens dark scenes, which may cause graininess in low
light scenes.
Fixed: no enhancement. This setting disables the Max. Gain Level option.
If you select this option, the AutoDome 700 Series makes the following changes
automatically:
– Night Mode: switches to Color
– Auto Iris: switches to Constant
Normal
Medium
High (default)
Off: turns the Auto SensUP Off.
AutoSensUp: increases camera sensitivity by increasing the integration time on the
camera. This is accomplished by integrating the signal from a number of consecutive
video frames to reduce signal noise.
If you select this option, the AutoDome makes the following change automatically:
– Auto Iris: switches to Constant
– Shutter: is disabled
Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome
images.
Color: The camera does not switch to Night Mode regardless of ambient light conditions.
User Manual
AutoDome 700 Series IP PTZ Camera
Bosch Security Systems, Inc.