Table of Contents
Advertisement
AutoDome 700 Series IP PTZ Camera
2.10
Recordings page
Click Recordings to access the Recordings page from the Livepage or Settings page (the
Recordings link is only visible if a storage medium has been selected).
Selecting Recordings
All saved sequences are displayed in a list. A track number is assigned to each sequence. Start
time and stop time, recording duration, number of alarms, and recording type are displayed.
To play back recorded video sequences:
1.
2.
3.
Export to FTP
Click Export to FTP to send the current track to the FTP server. If required, change the times
within the selected range.
2.10.1
Controlling playback
A time bar below the video image allows quick orientation. The time interval associated with
the sequence is displayed in the bar in gray. A green arrow above the bar indicates the
position of the image currently being played back within the sequence.
The time bar offers various options for navigation in and between sequences.
–
–
–
Control playback by means of the buttons below the video image. The buttons have the
following functions:
Slide control
Continuously select playback speed by means of the speed regulator:
Bookmarks
In addition, set markers in the sequences, so-called bookmarks, and jump directly to these.
These bookmarks are indicated as small yellow arrows above the time interval. Use the
bookmarks as follows:
Bosch Security Systems, Inc.
Select Recording 1 or 2 in the drop-down menu. (The contents for 1 and 2 are identical,
only the quality and location may be different.)
Use the arrow buttons to browse the list.
Click a track. The playback for the selected sequence starts.
Change the time interval displayed by clicking the plus or minus icons. The display can
span a range from two months to a few seconds.
If required, drag the green arrow to the point in time at which the playback should begin.
Red bars indicate the points in time where alarms were triggered. Drag the green arrow
to navigate to these points quickly.
Start/Pause playback
Jump to start of active sequence or to previous sequence
Jump to start of the next video sequence in the list
Jump to the previous bookmark
User Manual
Using the AutoDome 700 Series | en
F.01U.273.798 | 3.0 | 2012.08
19
Advertisement
Table of Contents
