Advertisement
When switching off your system
First turn off the amplifiers, and then turn off the ECC-1.
XLR configurations
XLR output:
Technical specifications ECC-1
The following technical data were measured on randomised test objects and are typical data.
All measurements are made at 120V / 240V // 50Hz / 60Hz
Measurements
Output impedance
Output level
Noise floor (0 dB gain)
Frequency deviation
Channel separation
THD + N
Digital/Analogue conversion
Dynamic range
Power consumption (no load or signal)
Dimensions
Width
Depth
Height
Weight
Specifications are subject to change without further notice.
1 = ground
2 = positive
3 = negative
100 ohm
4,5Vrms
< -130 dB
< 0.05 dB
> 110 dB
< 0.002%
24 bit, 192 kHz
120 dB
35 W
483 mm
389 mm
105 mm including feets
9 kg
Advertisement
