ELECTROCOMPANIET ECC-1 Owner's Manual page 4

How to connect your system
See illustration 1.
Outputs
Balanced analogue operation:
Use an XLR interconnect and connect the right and left outputs on the ECC-1 to the right and left
inputs on the integrated amplifier or preamplifier
Unbalanced analogue operation:
Use Phono interconnects and connect the right and left outputs on the ECC-1 to the right and left
inputs on the integrated amplifier or preamplifier
S/P DIF digital operation:
Use a 75-ohm coaxial digital cable from the ECC-1 to the digital input on your DAC.
Front panel
See illustration 2.
The main switch is located on the centre of the front panel.
The four buttons on the right-hand side of the front panel is used to play, stop, eject and skip to
previous/next track.
Function
Play
Stop
Eject
Previous track
Next track
Navigator window
The navigator window is located on the left side and shows what track is playing, time left etc.
How to power up your system
You should always power up your system in the following order:
First turn on the ECC-1, and then turn on the amplifiers.
Button
Up button
Down button
Down button (hold button pressed until tray
eject)
Left button
Right button