Advertisement
Unpacking the ECC-1
Immediately upon receipt of the ECC-1, inspect the carton for possible damage during shipment.
The carton and packaging have been designed to provide the safest possible protection during
transport of your product. Unpack the unit carefully. Save all packaging materials for future
shipment.
The contents of the carton
1 piece Electrocompaniet ECC-1
1 piece AC mains cord.
1 piece inspection card.
1 piece user manual
If anything is missing or any transport damages is discovered, please contact your dealer for
assistance.
Send also a report to
service@electrocompaniet.no
with all the information from the inspection
card. Please include model, serial no, packaging information and person responsible for final
inspection in your e-mail. This is part of our quality system and this information helps us to
continuously improve our quality control.
Set up procedure
Before connecting the ECC-1 to the mains, check that the main voltage indicated on the rear panel
corresponds to the line voltage in the territory where you intend to use the unit.
How to avoid damages
Do not under any circumstance connect or disconnect equipment when power is turned on.
The design of the RCA plug generates a huge transient when inserted.
Connecting or disconnecting equipment with the power on can result in severe damage to both
speakers and amplifier.
How to avoid noise problems
The ECC-1 contains delicate circuits that are sensitive to magnetic stray fields.
The unit should not be placed near main transformers, TV sets, etc. Care should also be taken
regarding placement of the interconnect cables. Do not run interconnect cables in parallel with main
cords or speaker cables. Keep interconnect cables as short as possible.
Advertisement
