Irst Driver Installation - EUROCOM Monster 3.0 User Manual

Modules
7
7 - 10 Setting Up SATA RAID or AHCI Mode
33. Click Browse and browse to the location you copied the files to on your USB Flash
drive or external USB hard disk (X: denotes your USB Flash drive or external USB
hard disk):
• X:\f6flpy-x86 (for Windows 8 32bit)
• X:\f6flpy-x64 (for Windows 8 64bit)
34. Click Next.
35. Follow the on-screen instructions to install the Windows 8 operating system.
36. Install the Windows drivers from the Device Drivers & Utilities + User's Manual
disc as per Table 4 - 1, on page 4 - 3
Storage Technology driver - see overleaf).
37. Run the Intel® Rapid Storage Technology application to manage your RAID
volume as instructed in
on page 7 - 39.

IRST Driver Installation

1. Insert the Device Drivers & Utilities + User's Manual disc into an attached
DVD drive.
2. Click Option Drivers (button).
3. Click 4.Install IRST Driver > Yes.
4. Click Next > Next.
5. Click the tickbox to accept the license and click Next.
6. Click Next > Next > Next.
7. Click Finish to restart the computer.
8. See "Intel® Rapid Storage Technology for RAID Systems" on page 7 - 39
(make sure you install the Intel Rapid
"Intel® Rapid Storage Technology for RAID Systems"
.